TRANEMO 5339 84 ARC FLASH JACKET - Class 1, 10.1 CAL/CM²

Tranemo 5339 84 Arc Flash Jacket, Class 1, 10.1 cal/cm²

The Tranemo 5339 84 is an arc-rated hi-vis jacket for personnel working on or near energised electrical equipment. It carries an ATPV of 10.1 cal/cm² and is certified to IEC 61482-2 Class 1, so it sits in the PPE band typically specified for MV switching, LV panel work and general substation tasks where the incident energy is at or below that level. The fluorescent aramid fabric also meets EN ISO 20471 Class 2, which matters when your team is working trackside, roadside or anywhere visibility is part of the risk assessment.

Standards and Protection

The fabric is an aramid blend at 220 g/m² with a limiting oxygen index of 31.2%, so the flame resistance is inherent to the fibre rather than a treatment that washes out. If you are unsure how arc rated differs from simply flame resistant, our guide on the difference between AR and FR clothing explains it plainly.

Design and Practical Features

• Concealed front zip with press studs, keeping metal away from the arc path
• Long vertical chest pocket with zip and hidden keyring holder, plus a pen strap at the right chest
• Side pockets and a sleeve pocket with flaps, and two large inside pockets
• Hidden tool keeper at the left side and concealed knife buttons on the chest pocket
• Extended back and actionback for free movement when reaching into panels or operating switchgear
• Adjustable waistband and cuffs for a close, secure fit over base layers

Sizes run XS to XXXL, in orange/navy, red/navy and yellow/navy. The jacket pairs with matching trousers from our arc flash jackets and trousers range, and the wider arc flash protection category covers gloves, face shields and switching suits where your study calls for higher ratings.

FAQs

Is 10.1 cal/cm² enough for our switchroom?

That depends on the incident energy at each location, which only an arc flash study or proper calculation can tell you. Always check the figure on your equipment label or study report before specifying PPE.

Does the flame resistance wash out over time?

No. The protection comes from the aramid fibre itself, not a chemical finish, so it lasts the life of the garment provided the washing instructions are followed. Inspect the jacket regularly for damage or contamination.

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.