Sofamel 645 POWER-1/3,3 / IEC electronic voltage detector 1 to 3,3 kV

Sofamel 645 POWER-1/3,3 / IEC electronic voltage detector 1 to 3,3 kV
SKU: POWER-1/3,3
The Sofamel 645 POWER-1/3,3 voltage detector is equipped with high-brightness, low-consumption LEDs at the top for illumination in dark areas, independent of the detection system. It indicates voltage presence with multiple high-brightness red LEDs visible from ...

The Sofamel 645 POWER-1/3,3 voltage detector is equipped with high-brightness, low-consumption LEDs at the top for illumination in dark areas, independent of the detection system. It indicates voltage presence with multiple high-brightness red LEDs visible from all angles (360°) and an intermittent buzzer sound. The absence of voltage is shown by multiple high-brightness green LEDs over 360°. A low battery is indicated by an orange LED, and the device stops operating when the battery is low. It features a self-checking system for the entire circuit, activated by a test button. The detector works in temperatures ranging from -25°C to +55°C and auto-starts when voltage is detected. It powers down to standby mode after two minutes of no voltage detection, consuming less than 1 µA in this mode. Designed for both indoor and outdoor use, it attaches to an insulating pole with a universal head. The device comes with 2×1.5V AAA high-capacity, high-durability batteries and is supplied in a reinforced case. It complies with IEC 61243:2003+A1:2009 and UNE-EN 61243-1:2006+A1:2011 standards.

645 POWER-1/3,3

  • Rated voltage: from 1 to 3,3 kV
  • Frequency: 50 / 60 Hz

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.

Close