The ProGARM 7480 is a premium hi-visibility arc flash coverall in lightweight 250 g/m² VXS+ inherent fabric, CE certified for arc protection to Class 1 with 9.5 cal/cm² (EBT50). Built for authorised persons, utility engineers and contractors working in substations and switchrooms where arc flash risk is assessed.
ProGARM 7480 Arc Coverall, Class 1, 9.5 cal/cm²
The ProGARM 7480 is a premium hi-visibility arc flash coverall for personnel working on or near energised electrical equipment. It is CE certified for arc protection to Class 1 with an EBT50 of 9.5 cal/cm², and it uses ProGARM’s lighter weight VXS+ inherent fabric, so the flame resistant and arc protective properties are built into the fibre and last the lifetime of the garment rather than washing out.
Fabric and Protection
The VXS+ HVY250W fabric is a 250 g/m² woven inherent hi-visibility material. In practice that means breathable, soft-to-wear protection that stays colourfast, with less than 3% washing shrinkage, and instant extinguishing behaviour against flame and arc flash hazards. The coverall also carries 5 cm FR reflective tape, double stitched for longer life, and ProGARM’s SafetyICON system on the arm, a visual icon strip showing the EN norms the garment meets.
Key Features
- Mandarin collar for maximum neck protection
- Chest pockets with flaps, phone pocket on sleeve, and side access pockets with entry inside the coverall
- Kneepad pockets for use with kneepads
- Gas monitor loop for a secure fixing point
- ThermSAFE plastic FR zippers, CE certified
- Velcro secured cuff tabs for a close fit around the wrist or gloves
- Internal elastic two-point adjustable waistband
- Triple stitched side seams and Easy-Stretch side panels
Sizing and Colour
| Option | Detail |
|---|---|
| Colour | Hi-Viz Yellow |
| Regular leg (31 in / 80 cm) | Sizes S to 4XL |
| Tall leg (33 in / 85 cm) | Sizes M to 2XL |
| Short leg | By re-hemming |
Where It Fits in Your PPE Programme
A Class 1, 9.5 cal/cm² coverall suits switching and maintenance tasks where your arc flash study shows incident energy at or below that level. Unsure what rating your switchrooms need? Start with our guidance on what arc flash is and browse the wider arc flash protection range.
FAQs
What does Class 1, 9.5 cal/cm² mean on this coverall?
Class 1 is the arc protection class under the box test method, and 9.5 cal/cm² is the EBT50 value from open arc testing. Match your PPE to the incident energy shown on your arc flash labels or study.
Will the arc protection wash out over time?
No. The VXS+ fabric is inherent, so the protective properties are part of the fibre itself and last the garment’s lifetime. Follow the care label: no bleach, no boiling, detergents only, and store clean and dry away from strong sunlight.
Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.



