ProGARM 5816 Trouser, Anti-Static, 9.0 cal/cm²

ProGARM 5816 Trouser, Anti-Static, 9.0 cal/cm²

The ProGARM 5816 is an anti-static arc flash trouser rated at 9.0 cal/cm², built for people who work on or near energised electrical equipment and need tested protection against the thermal energy of an electric arc. It sits in our arc flash protection range and is typically specified as the lower half of a jacket and trouser combination for switching, maintenance and general site work.

What the 9.0 cal/cm² rating means

The cal/cm² figure is the garment’s arc rating: the level of incident energy the fabric system is proven to protect against under arc flash test conditions. In practical terms, 9.0 cal/cm² is a common specification for MV and LV switching tasks where an arc flash risk assessment has shown the incident energy at the working point falls within that level. Our what is arc flash guide explains how the hazard and the ratings relate.

The anti-static properties matter too. Where electrostatic discharge is a concern, anti-static clothing reduces the risk of the garment itself becoming an ignition or discharge source.

Key points

• Arc rated at 9.0 cal/cm² for protection against the thermal effects of electric arc
• Anti-static construction for environments where electrostatic discharge must be controlled
• Designed to be worn with a matching arc-rated jacket as a full combination
• From ProGARM, a specialist arc flash clothing manufacturer whose garments we supply across Ireland

Specification summary

Full fabric, sizing and certification details are confirmed on enquiry, so tell us the sizes and quantities you need and we will come back with the specifics.

FAQs

Is 9.0 cal/cm² enough for my switchroom?

That depends on the incident energy at your equipment, which an arc flash study or risk assessment determines. If your calculated incident energy is at or below 9.0 cal/cm², this trouser is a suitable lower-body option. Where energy levels are higher, a higher-rated garment or switching suit is required.

How should arc-rated trousers be laundered?

Follow the garment’s care label and manufacturer laundering guidance. Avoid bleach and fabric softeners, as these can degrade flame-resistant and arc-rated performance. Garments that are contaminated, damaged or heavily worn should be removed from service and replaced.

Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.