The Fristads Flamestat 5075 ATHS is an arc-rated hi-vis waistcoat in Hi-Vis Yellow, approved to EN 61482-1-2 class 1 with an EBT of 10.5 cal/cm² to EN 61482-1-1. It also meets EN ISO 20471 class 2 and EN 1149-5, suiting authorised persons and contractors working around MV and LV switchgear where both arc protection and visibility are required.
Fristads Flamestat 5075 ATHS Hi-Vis Waistcoat, Arc Class 1, 10.5 cal/cm²
The Fristads Flamestat 5075 ATHS is a high-visibility waistcoat that combines arc flash protection with EN ISO 20471 class 2 visibility, a combination that matters on live sites where you are switching, racking, or working near energised equipment in traffic or plant areas. It is approved to EN 61482-1-2 class 1 (box test) and carries an EBT of 10.5 cal/cm² with HAF of 81.4% under the EN 61482-1-1 open-arc method. If you are unsure what those ratings mean for your PPE selection, our guide to what arc flash is explains the hazard and how incident energy figures are used.
Standards and Certification
According to the manufacturer datasheet, the waistcoat is approved as follows. Note that the EN ISO 11612 and EN 1149-5 certifications apply when worn together with Fristads Shirt 109425.
| Standard | Rating |
|---|---|
| EN 61482-1-2 (box test) | Class 1 |
| EN 61482-1-1 (open arc) | EBT 10.5 cal/cm², HAF 81.4% |
| EN ISO 11612 | A1 B1 C1 F1 (with Shirt 109425) |
| EN 1149-5 (electrostatic) | Certified (with Shirt 109425) |
| EN ISO 20471 (hi-vis) | Class 2 |
| EN 13034 | Fabric approved |
| ISO 15797 | Leasing laundry-tested |
| OEKO-TEX | Certified |
Material and Features
The fabric is 45% modacrylic, 35% cotton, 18% polyamide and 2% anti-static fibre at 300 g/m², with CORDURA reinforcement in 79% cotton FR, 20% polyamide and 1% antistatic fibre. Practical details include:
- Reflective detailing on the shoulders
- Front placket with zip and concealed snap fastening
- Two loose-hanging chest pockets, one with flap and D-ring
- CORDURA reinforced tuckable front pockets with tool loops
- Two reinforced back pockets with extra tool pockets, plus two hammer loops
Sizes run XS to 2XL in colour 130 Hi-Vis Yellow. Browse the wider arc flash protection range for matching garments.
FAQs
Is this waistcoat enough arc protection on its own?
That depends on the incident energy at your equipment. The waistcoat is rated class 1 to EN 61482-1-2 with an EBT of 10.5 cal/cm², and some of its certifications apply only when worn with Fristads Shirt 109425. Your arc flash study or site risk assessment should dictate the required rating.
Can it be industrially laundered?
Yes. The datasheet states the garment is leasing laundry-tested to ISO 15797, so it suits rental and industrial laundry programmes. Always follow the care label, as incorrect laundering can degrade flame-resistant and arc-rated properties over time.
What sizes and colours are available?
This version is colour 130 Hi-Vis Yellow in sizes XS to 2XL. The manufacturer notes that sizes may vary between colours, so confirm availability when ordering.
Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.



