The BSD Classic Protective Arc Flash Shirt is an arc-rated work shirt tested to 10.8 cal/cm², with fault arc protection under the IEC 61482-1-2 box test method. Made from a cotton-rich mixed fabric at 220 g/m² with reflective strips, it suits authorised persons and switchroom staff needing everyday arc flash protection.
BSD Classic Protective Arc Flash Shirt, 10.8 cal/cm²
The BSD Classic Protective Arc Flash Shirt is an arc-rated work shirt for personnel who switch, test, or work near energised equipment in substations and switchrooms. It carries an arc rating of 10.8 cal/cm² and fault arc protection assessed under the IEC 61482-1-2 box test method. BSD is a German manufacturer of PPE against electrical hazards, producing in Germany and the EU.
A shirt like this is the everyday layer, the garment your team actually wears all shift rather than a switching suit pulled on for one task. If you are unsure what incident energy your switchrooms present, that is exactly what an arc flash study establishes, and our guide on what arc flash is explains how ratings relate to the labels on your boards.
Key Features
- Arc rated at 10.8 cal/cm²
- Fault arc protection, box test class 1, class 2 or above class 2
- Mixed fabric with cotton content above 80%, plus polyamide and other fibres
- Fabric weight of 220 g/m² (6.5 oz/yd²), light enough for all-day wear
- Reflective strips and piping for improved visibility
- Sporty cut, available in Navy or Royal Blue
- Extensive size range, 22 to 110
Specifications
| Attribute | Detail |
|---|---|
| Arc rating | 10.8 cal/cm² |
| Fault arc protection | Class 1, class 2 or above class 2 (box test) |
| Fabric | Mixed fabric, cotton above 80%, polyamide and other fibres |
| Fabric weight | 220 g/m² (6.5 oz/yd²) |
| Visibility | Reflective strips and piping |
| Colours | Navy, Royal Blue |
| Sizes | 22 to 110 |
Where It Fits in Your PPE Programme
An arc-rated shirt covers the torso and arms for routine tasks in lower incident-energy locations, and it layers under an arc flash jacket or switching suit where the study demands more. It does not protect the face or hands, so pair it with the appropriate visor, helmet, and gloves from our arc flash protection range. You can also browse the full selection of arc flash shirts and polo shirts if your team needs a mix of ratings and styles.
FAQs
Is 10.8 cal/cm² enough for our switchroom?
That depends on the incident energy at each location, which only an arc flash study or a proper assessment can tell you. A 10.8 cal/cm² shirt suits tasks where the calculated incident energy at the working distance sits below that figure with an appropriate margin. If you do not have study results, we can carry out an arc flash study and label your boards accordingly.
Not exactly what you are looking for? Contact us with your exact requirements, we’re happy to help.
