ArcFlash Hazard Analysis Procedures

Posted on

When performing ArcFlash Hazard Analysis, a safety auditor collects data about the power distribution of a power facility.

What data should be collected:

  • A one-line drawing of all components with nameplate specifications of every device
  • Details of the lengths and cross section area of all cables
  • Utility information including the minimum and maximum fault currents that can be expected at the entrance to the facility

Once the above data has been collected, a short circuit analysis should be performed, followed by a coordination study. All the data is then processed into NFPA 70E-2000 or IEEE Standard 1584-2002 equations, which produce the required arc flash protection boundary distances and incident energy requirements.

Contact us learn more about substation safety, or to enquire about any of our substation safety equipment.

Comments are closed.